K8S集群部署-创新互联

之前的文档安装各种报错，感觉自己都err了，重新梳理了一下

在阆中等地区，都构建了全面的区域性战略布局，加强发展的系统性、市场前瞻性、产品创新能力，以专注、极致的服务理念，为客户提供网站制作、成都网站制作网站设计制作按需制作,公司网站建设,企业网站建设,成都品牌网站建设,营销型网站建设,成都外贸网站建设,阆中网站建设费用合理。

机器：centos7.9，内存都给了3G

k8s	172.21.32.15	master1	etcd, kube-apiserver, kube-controller-manager, kubectl, kubeadm, kubelet, kube-proxy, flannel
k8s	172.21.32.11	node1	kubectl, kubelet, kube-proxy, flannel
k8s	172.21.32.9	node2	kubectl, kubelet, kube-proxy, flannel

初始化集群

所有机器

1:hosts解析

# 在master节点
$ hostnamectl set-hostname mast1 #设置master节点的hostname

# 在slave-1节点
$ hostnamectl set-hostname node1 #设置slave1节点的hostname

# 在slave-2节点
$ hostnamectl set-hostname node2 #设置slave2节点的hostname

#配置host文件
cat >>/etc/hosts<

2:iptables保证如下端口可通：
master节点：TCP：6443，2379，2380，60080，60081UDP协议端口全部打开
node节点：UDP协议端口全部打开
iptables -P FORWARD ACCEPT
3：分区关闭swapoff -a
sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab
4：关闭selinux和防火墙sed -ri 's#(SELINUX=).*#\1disabled#' /etc/selinux/config
setenforce 0
systemctl disable firewalld && systemctl stop firewalld
5：修改内核参数cat</etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward=1
vm.max_map_count=262144
EOF
modprobe br_netfilter
sysctl -p /etc/sysctl.d/k8s.conf
6：设置yum源curl -o /etc/yum.repos.d/Centos-7.repo http://mirrors.aliyun.com/repo/Centos-7.repo

 curl -o /etc/yum.repos.d/docker-ce.repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
 
cat</etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
        http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

 yum clean all && yum makecache
7：时间同步要做！！node节点加入mest出现过问题
yum install ntpdate
ntpdate ntp1.aliyun.com;hwclock --systohc 
安装docker建议安装旧版docker，稳定集群能跑起来第一....
## 查看所有的可用版本
$ yum list docker-ce --showduplicates | sort -r

##安装旧版本 
yum install docker-ce-cli-18.09.9-3.el7  docker-ce-18.09.9-3.el7

## 安装源里最新版本
$ yum install docker-ce

## 配置docker加速
$ mkdir -p /etc/docker
vi /etc/docker/daemon.json
{
  "insecure-registries": [    
    "172.21.32.15:5000" 
  ],                          
  "registry-mirrors" : [
    "https://8xpk5wnt.mirror.aliyuncs.com"
  ]
}

## 启动docker
$ systemctl enable docker && systemctl start docker部署kubernetes 
1. 安装 kubeadm, kubelet 和 kubectl指定版本，不要安装新版，会报错，因为不适用docke了！！
所有节点都要操作！！
$ yum install -y kubelet-1.16.2 kubeadm-1.16.2 kubectl-1.16.2 --disableexcludes=kubernetes
## 查看kubeadm 版本
$ kubeadm version
## 设置kubelet开机启动
$ systemctl enable kubelet
第一个报错：kubelet启动失败不用管！！之后安装插件和加入mester后会正常的
2：初始化配置文件只在master节点执行
$ kubeadm config print init-defaults >kubeadm.yaml
$ cat kubeadm.yaml
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 172.21.32.15  # apiserver地址，因为单master，所以配置master的节点内网IP
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  name: k8s-master
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.aliyuncs.com/google_containers  # 修改成阿里镜像源
kind: ClusterConfiguration
kubernetesVersion: v1.16.2
networking:
  dnsDomain: cluster.local
  podSubnet: 10.244.0.0/16  # Pod 网段，flannel插件需要使用这个网段，没有添加上去
  serviceSubnet: 10.96.0.0/12
scheduler: {}
3. 提前下载镜像只在master节点操作
#查看镜像
$ kubeadm config images list --config kubeadm.yaml
registry.aliyuncs.com/google_containers/kube-apiserver:v1.16.0
registry.aliyuncs.com/google_containers/kube-controller-manager:v1.16.0
registry.aliyuncs.com/google_containers/kube-scheduler:v1.16.0
registry.aliyuncs.com/google_containers/kube-proxy:v1.16.0
registry.aliyuncs.com/google_containers/pause:3.1
registry.aliyuncs.com/google_containers/etcd:3.3.15-0
registry.aliyuncs.com/google_containers/coredns:1.6.2



#提前下载镜像到本地
$ kubeadm config images pull --config kubeadm.yaml
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-apiserver:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-controller-manager:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-scheduler:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-proxy:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/pause:3.1
[config/images] Pulled registry.aliyuncs.com/google_containers/etcd:3.3.15-0
[config/images] Pulled registry.aliyuncs.com/google_containers/coredns:1.6.2
4. 初始化master节点只在master节点操作
kubeadm init --config kubeadm.yaml
添加成功信息
...
Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.163.131:6443 --token abcdef.0123456789abcdef \
     --discovery-token-ca-cert-hash sha256:76806fbf17659804e6445b75561f713c055a66fdcccd786bfce0021d2b32ab32
报错：运行kubelet报错，端口没运行，环境变量没有添加
echo "export KUBECONFIG=/etc/kubernetes/admin.conf">>/etc/profile
source /etc/profile
5：添加集群node操作，上面初始化master输出的命令
mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config
node会报错err，没配置文件，从mestr拷贝过去，在执行上面命令
scp /etc/kubernetes/admin.conf  root@192.168.163.132:/etc/kubernetes/admin.conf 
 scp /etc/kubernetes/admin.conf  root@192.168.163.133:/etc/kubernetes/admin.conf
继续执行
kubeadm join 192.168.163.131:6443 --token abcdef.0123456789abcdef \
> --discovery-token-ca-cert-hash sha256:76806fbf17659804e6445b75561f713c055a66fdcccd786bfce0021d2b32ab32
如果遇到卡住了，可能token过期在master节点重新生成后，node上继续操作
kubeadm token create --ttl 0
此时使用 kubectl get nodes查看节点应该处于notReady状态，因为还未配置网络插件
6：配置flannel插件wget https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml
kubectl apply -f kube-flannel.yml
这个网址应该时访问不了的
这是yaml文件，先提前下载镜像，快一点
docker pull quay.io/coreos/flannel:v0.15.1
docker pull rancher/mirrored-flannelcni-flannel-cni-plugin:v1.0.0
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
  - configMap
  - secret
  - emptyDir
  - hostPath
  allowedHostPaths:
  - pathPrefix: "/etc/cni/net.d"
  - pathPrefix: "/etc/kube-flannel"
  - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: ['NET_ADMIN', 'NET_RAW']
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unused in CaaSP
    rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: flannel
rules:
- apiGroups: ['extensions']
  resources: ['podsecuritypolicies']
  verbs: ['use']
  resourceNames: ['psp.flannel.unprivileged']
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - nodes
  verbs:
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - nodes/status
  verbs:
  - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: kubernetes.io/os
                operator: In
                values:
                - linux
      hostNetwork: true
      priorityClassName: system-node-critical
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni-plugin
        image: rancher/mirrored-flannelcni-flannel-cni-plugin:v1.0.0
        command:
        - cp
        args:
        - -f
        - /flannel
        - /opt/cni/bin/flannel
        volumeMounts:
        - name: cni-plugin
          mountPath: /opt/cni/bin
      - name: install-cni
        image: quay.io/coreos/flannel:v0.15.1
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.15.1
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN", "NET_RAW"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
      - name: run
        hostPath:
          path: /run/flannel
      - name: cni-plugin
        hostPath:
          path: /opt/cni/bin
      - name: cni
        hostPath:
          path: /etc/cni/net.d
      - name: flannel-cfg
        configMap:
          name: kube-flannel-cfg
7:验证集群[root@mast1 ~]# kubectl get  nodes
NAME    STATUS   ROLES    AGE   VERSION
mast1   Ready    master   83m   v1.16.2
node1   Ready51m   v1.16.2
node2   Ready51m   v1.16.2
[root@mast1 ~]# kubectl get pods -A
NAMESPACE     NAME                            READY   STATUS    RESTARTS   AGE
kube-system   coredns-58cc8c89f4-mq8vp        1/1     Running   0          83m
kube-system   coredns-58cc8c89f4-vrxt5        1/1     Running   0          83m
kube-system   etcd-mast1                      1/1     Running   1          82m
kube-system   kube-apiserver-mast1            1/1     Running   1          82m
kube-system   kube-controller-manager-mast1   1/1     Running   1          82m
kube-system   kube-flannel-ds-hmvnb           1/1     Running   0          51m
kube-system   kube-flannel-ds-pscqb           1/1     Running   0          59m
kube-system   kube-flannel-ds-x8l65           1/1     Running   0          51m
kube-system   kube-proxy-bxftp                1/1     Running   0          51m
kube-system   kube-proxy-q9ph9                1/1     Running   0          51m
kube-system   kube-proxy-spqcn                1/1     Running   1          83m
kube-system   kube-scheduler-mast1            1/1     Running   1          82m
你是否还在寻找稳定的海外服务器提供商？创新互联www.cdcxhl.cn海外机房具备T级流量清洗系统配攻击溯源，准确流量调度确保服务器高可用性，企业级服务器适合批量采购，新人活动首月15元起，快前往官网查看详情吧
                

                当前题目：K8S集群部署-创新互联                

                当前路径：http://myzitong.com/article/dhoeoi.html


        
            其他资讯
            
                
                        android控件预览 android控件属性大全
                    

                        html5获取本地设备 html获取当前地址
                    

                        linux命令是列 linux 列
                    

                        html5客户端开发 html5 app应用开发教程
                    

                        css样式兼容笔记本 css兼容ie8