keepalived安装配置(Centos7)

keepalived简介
keepalive是一款可以实现高可靠的软件，通常部署在2台服务器上，分为一主一备。Keepalived可以对本机上的进程进行检测，一旦Master(主)检测出某个进程出现问题，将自己切换成Backup(副)状态，然后通知另外一个节点切换成Master(主)状态。
https://www.keepalived.org/download.html
http://nginx.org/en/download.html
```
# 将keepalived解压到/usr/local目录下
tar -zxvf keepalived-2.0.11.tar.gz  -C /usr/local
```

进入到/usr/local/keepalived-2.0.11目录

cd /usr/local/keepalived-2.0.11

临湘网站制作公司哪家好，找成都创新互联公司！从网页设计、网站建设、微信开发、APP开发、自适应网站建设等网站项目制作，到程序开发，运营维护。成都创新互联公司成立于2013年到现在10年的时间，我们拥有了丰富的建站经验和运维经验，来保证我们的工作的顺利进行。专注于网站建设就选成都创新互联公司。

开始configure

./configure --prefix=/usr/local/keepalived

#编译并安装
make && make install

出现以下信息表示编译成功

Keepalived configuration

Keepalived version : 2.0.11
Compiler : gcc
Preprocessor flags :
Compiler flags : -Wall -Wunused -Wstrict-prototypes -Wextra -Winit-self -g -D_GNU_SOURCE -fPIE -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -O2
Linker flags : -pie
Extra Lib : -lcrypto -lssl -lnl
Use IPVS Framework : Yes
IPVS use libnl : Yes
IPVS syncd attributes : No
IPVS 64 bit stats : No
HTTP_GET regex support : No
fwmark socket support : Yes
Use VRRP Framework : Yes
Use VRRP VMAC : Yes
Use VRRP authentication : Yes
With ip rules/routes : Yes
Use BFD Framework : No
SNMP vrrp support : No
SNMP checker support : No
SNMP RFCv2 support : No
SNMP RFCv3 support : No
DBUS support : No
SHA1 support : No
Use JSON output : No
libnl version : 1
Use IPv4 devconf : No
Use iptables : Yes
Use libiptc : No
Use libipset : No
Use nftables : No
init type : systemd
Strict config checks : No
Build genhash : Yes
Build documentation : No

编译可能出现的问题

*** WARNING - this build will not support IPVS with IPv6. Please install libnl/libnl-3 dev libraries to support IPv6 with IPVS.
执行yum命令yum -y install libnl libnl-devel解决上述警告问题
yum -y install libnl libnl-devel

configure: error: in /usr/local/keepalived-2.0.11': configure: error: no acceptable C compiler found in $PATH Seeconfig.log' for more details

yum install gcc

configure: error:
!!! OpenSSL is not properly installed on your system. !!!
!!! Can not include OpenSSL headers files. !!!
[root@dajia keepalived-2.0.11]#

yum -y install openssl-devel

安装完成以后，重新执行configure ... 命令

将keepalived添加到系统服务中

路径  说明
/usr/local/keepalived-2.0.10    解压后源码存放路径
/usr/local/keepalived   安装目录

# 拷贝执行文件
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

# 将初始化脚本拷贝到系统初始化目录下
cp /usr/local/keepalived-2.0.10/keepalived/etc/init.d/keepalived /etc/init.d/

# 将keepalived配置文件拷贝到etc下
cp /usr/local/keepalived-2.0.10/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

# 创建keepalived文件夹
mkdir /etc/keepalived/

# 将keepalived配置文件拷贝到etc下
cp /usr/local/keepalived-2.0.10/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/

# 添加可执行权限
chmod +x /etc/init.d/keepalived

# 添加keepalived到开机启动
chkconfig --add keepalived
chkconfig keepalived on

此时已加入系统服务 可使用services 启动

#启动
service keepalived start
#停止
service keepalived stop
#重启
service keepalived restart
#查看启动情况
ps -aux |grep keepalived

配置keepalived虚拟IP

修改刚添加到系统的配置文件：vi /etc/keepalived/keepalived.conf
注意 是系统的配置文件(/etc/keepalived/keepalived.conf)
注意 是系统的配置文件(/etc/keepalived/keepalived.conf)
注意 是系统的配置文件(/etc/keepalived/keepalived.conf)
不是安装目录/usr/local...下的

vrrp_instance VI_1 {
state MASTER //MASTER主节点，备用节点上设置为state BACKUP
interface ens33 //绑定虚拟机IP的网卡两个节点设置一样根据 ipaddr换成对应的网卡地址
virtual_router_id 51 //VRRP组名，主副节点设置必须一样，指名各个节点属于同一个VRRP组，同一个组的节点互相抢IP
priority 100 //优先级(1~254之间)，备用节点必须比主节点优先级低
advert_int 1 //组播信息发送间隔，两个节点设置必须一样
authentication { //设置验证信息，两个节点设置必须一样，用于节点间信息转发时的加密
auth_type PASS
auth_pass 1111
}
virtual_ipaddress { // 虚拟IP两个节点设置必须一样，两节点同时抢一个io
192.168.33.60/24 // 如果两个nginx的ip分别是192.168.33.61,,...62，则此处的虚拟ip跟它俩同一个网段即可 24代表3个255的子网掩码
}
}

如果要 ping 192.168.33.60 还需要注释掉配置文件中的# vrrp_strict

遇到的问题
主备都抢到了虚拟ip

采用tcpdump抓包定位问题，以下是在192.168.93.141 主节点的抓包结果
tcpdump -i ens33 vrrp -n
![](/upload/otherpic47/9034.jpg?x-oss-process=image/watermark,size_16,text_QDUxQ1RP5Y2a5a6i,color_FFFFFF,t_100,g_se,x_10,y_10,shadow_90,type_ZmFuZ3poZW5naGVpdGk=)

以下是在10.11.4.187 备节点的抓包结果
tcpdump -i ens33 vrrp -n

![](/upload/otherpic47/9036.jpg?x-oss-process=image/watermark,size_16,text_QDUxQ1RP5Y2a5a6i,color_FFFFFF,t_100,g_se,x_10,y_10,shadow_90,type_ZmFuZ3poZW5naGVpdGk=)

由上图可以看到，192.168.93.140和192.168.93.141两个IP在轮流发送组播信号。而正常的应该是由MASTER服务器发送组播，如果BACKUP收不到MASTER的组播信号了，那么判定MASTER宕机了，BACKUP就会接手VIP

问题就是出现在了防火墙这里，防火墙阻止了vrrp组包发送

如果是Firewalld防火墙 则主、备都运行下面的命令

[root@dajia sysconfig]# firewall-cmd --direct --permanent --add-rule ipv4 filter INPUT 0 --protocol vrrp -j ACCEPT
success
[root@dajia sysconfig]# firewall-cmd --reload
success

分享题目：keepalived安装配置(Centos7)
分享地址：http://myzitong.com/article/googsg.html

keepalived安装配置(Centos7)

进入到/usr/local/keepalived-2.0.11目录

开始configure

Keepalived configuration

其他资讯