怎样进行redis环境搭建，针对这个问题，这篇文章详细介绍了相对应的分析和解答，希望可以帮助更多想解决这个问题的小伙伴找到更简单易行的方法。

创新互联为企业级客户提高一站式互联网+设计服务，主要包括成都网站设计、网站建设、app软件开发公司、小程序制作、宣传片制作、LOGO设计等，帮助客户快速提升营销能力和企业形象，创新互联各部门都有经验丰富的经验，可以确保每一个作品的质量和创作周期，同时每年都有很多新员工加入，为我们带来大量新的创意。 

因为工作环境中有redis，所以对redis进行了学习，当然首先就是从搭建环境开始，下面是我对于搭建redis环境的记录。

系统是SuSE 11 sp2,

软件环境如下所示：

linux-svnfile:/home/apps/redis # ls

redis-3.0.0.gem     ruby-1.9.2-p290.tar.gz  zlib-1.2.7.tar.gz

redis-3.0.0.tar.gz  rubygems-2.4.6.tgz

redis.conf          zlib-1.2.6.tar.gz

安装基础环境：

linux-svnfile:/home/apps/redis # tar -zxf zlib-1.2.6.tar.gz -C /usr/local/src

linux-svnfile:/usr/local/src/zlib-1.2.6 # ./configure --prefix=/usr/local/zlib

linux-svnfile:/usr/local/src/zlib-1.2.6 # make && make install

linux-svnfile:/home/apps/redis # tar -zxf ruby-1.9.2-p290.tar.gz -C /usr/local/src

linux-svnfile:/usr/local/src/ruby-1.9.2-p290 # ./configure --prefix=/usr/local/ruby

linux-svnfile:/usr/local/src/ruby-1.9.2-p290 # make && make install

linux-svnfile:/usr/local/ruby # ln -s /usr/local/ruby/bin/ruby /usr/local/bin

linux-svnfile:/home/apps/redis # tar xf rubygems-2.4.6.tgz -C /usr/local/src

linux-svnfile:/usr/local/src # mv rubygems-2.4.6 ../gem

linux-svnfile:/usr/local/gem # ruby setup.rb

linux-svnfile:/usr/local/gem # cp bin/gem /usr/local/bin/

linux-svnfile:/home/apps/redis # gem install -l redis-3.0.0.gem 

Successfully installed redis-3.0.0

Installing ri documentation for redis-3.0.0

Done installing documentation for redis after 0 seconds

1 gem installed

linux-svnfile:/home/apps/redis # tar -zxf redis-3.0.0.tar.gz -C /usr/local/src

linux-svnfile:/usr/local/src # mv redis-3.0.0 ../redis

linux-svnfile:/usr/local/redis # make

至此基础环境搭建完成

下面进行集群的搭建

linux-svnfile:/usr/local/redis # cp src/redis-server /usr/local/bin/

linux-svnfile:/usr/local/redis # cp src/redis-cli /usr/local/bin/

linux-svnfile:/usr/local/redis # cp src/redis-trib.rb /usr/local/bin

linux-svnfile:/usr/local/redis # mkdir -p /usr/local/cluster/{7000..7005}

linux-svnfile:/usr/local/redis # vi redis.conf

daemonize yes

port 7000

cluster-enabled yes

cluster-config-file nodes.conf

cluster-node-timeout 5000

appendonly yes

linux-svnfile:/usr/local/redis # cp redis.conf ../cluster/7000

linux-svnfile:/usr/local/redis # cp redis.conf ../cluster/7001

linux-svnfile:/usr/local/redis # cp redis.conf ../cluster/7002

linux-svnfile:/usr/local/redis # cp redis.conf ../cluster/7003

linux-svnfile:/usr/local/redis # cp redis.conf ../cluster/7004

linux-svnfile:/usr/local/redis # cp redis.conf ../cluster/7005

这里需要注意的是文件名对应文件里端口的配置，例如7001文件下的port参数需要改为7001，其他一样做修改。

linux-svnfile:/usr/local/redis # redis-server ../cluster/7000/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7001/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7002/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7003/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7004/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7005/redis.conf 

linux-svnfile:/usr/local/redis # ps -ef | grep redis

root     15590     1  0 18:52 ?        00:00:00 redis-server *:7000 [cluster]    

linux-svnfile:/usr/local/redis # redis-trib.rb create --replicas 1 127.0.0.1:7000 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005

>>> Creating cluster

Connecting to node 127.0.0.1:7000: OK

Connecting to node 127.0.0.1:7001: [ERR] Sorry, can't connect to node 127.0.0.1:7001

You have new mail in /var/mail/root

linux-svnfile:/usr/local/cluster/7000 # redis-server redis.conf 

linux-svnfile:/usr/local/cluster/7000 # cd ../7001

linux-svnfile:/usr/local/cluster/7001 # redis-server redis.conf 

linux-svnfile:/usr/local/cluster/7001 # cd ../7002

linux-svnfile:/usr/local/cluster/7002 # redis-server redis.conf 

linux-svnfile:/usr/local/cluster/7002 # cd ../7003

linux-svnfile:/usr/local/cluster/7003 # redis-server redis.conf 

linux-svnfile:/usr/local/cluster/7003 # cd ../7004

linux-svnfile:/usr/local/cluster/7004 # redis-server redis.conf 

linux-svnfile:/usr/local/cluster/7004 # cd ../7005

linux-svnfile:/usr/local/cluster/7005 # redis-server redis.conf 

linux-svnfile:/usr/local/cluster/7005 # ps -ef | grep redis

root     17575     1  0 20:05 ?        00:00:00 redis-server *:7000 [cluster]

root     17590     1  0 20:06 ?        00:00:00 redis-server *:7001 [cluster]

root     17604     1  0 20:06 ?        00:00:00 redis-server *:7002 [cluster]

root     17612     1  0 20:06 ?        00:00:00 redis-server *:7003 [cluster]

root     17616     1  0 20:06 ?        00:00:00 redis-server *:7004 [cluster]

root     17624     1  0 20:06 ?        00:00:00 redis-server *:7005 [cluster]

像是上面在启动服务时需要注意切换到相应的配置文件的目录下，不然相应端口的服务无法启动，例如我之前在/usr/local/redis目录下启动后只有7000对应的服务启动了。

linux-svnfile:/usr/local/redis # redis-server ../cluster/7000/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7001/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7002/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7003/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7004/redis.conf 

linux-svnfile:/usr/local/redis # redis-server ../cluster/7005/redis.conf 

linux-svnfile:/usr/local/redis # ps -ef | grep redis

root     15144 19064  0 18:37 pts/0    00:00:00 vi redis.conf

root     15590     1  0 18:52 ?        00:00:00 redis-server *:7000 [cluster]          

root     15616 19443  0 18:52 pts/1    00:00:00 grep redis

linux-svnfile:/usr/local/cluster #redis-cli -p 7000

127.0.0.1:7000>

删除slave节点

删除master节点

linux-svnfile:/usr/local/redis # redis-trib.rb reshard 127.0.0.1:7001

How many slots do you want to move (from 1 to 16384)? 5461 

What is the receiving node ID? 42929649e533ec8aad7cbb81f204f04c849d4bff

Please enter all the source node IDs.  

  Type 'all' to use all the nodes as source nodes for the hash slots.  

  Type 'done' once you entered all the source nodes IDs.  

Source node #1: 6fe9561e605b7ee85e67a2557f7fb641f482afb4 

Source node #2:done  

#Do you want to proceed with the proposed reshard plan (yes/no)? yes  

说明：

5461表示要删除master所有的slot数量

What is the receiving node ID是指将7000的slot迁移的节点7001的node-id

Source node #1是指要删除的master的node-id

下面可以看到7000的slot为0，而7001多了4561

在删除master节点出现如下面所示的错误，是因为删除master节点之前没有删除master节点的slave节点。

上面是在单台机器上做的集群，下面展示两台机器上做集群，其实也很简单。

参考之前的环境编译源码到另一台机器

在两台机器上编辑配置文件

/usr/local/redis # vi redis.conf

daemonize yes

port 7000

cluster-enabled yes

cluster-config-file nodes.conf

cluster-node-timeout 5000

appendonly yes

cluster-config-file nodes-7001.conf

分别创建目录和文件

linux-svnfile:/usr/local/redis # mkdir -p/usr/local/cluster/{7001..7003}

localhost:/usr/local/redis # mkdir -p/usr/local/cluster/{8001..8003}

linux-svnfile:/usr/local/redis # cpredis.conf ../cluster/7001

linux-svnfile:/usr/local/redis # cpredis.conf ../cluster/7002

linux-svnfile:/usr/local/redis # cpredis.conf ../cluster/7003

localhost:/usr/local/redis # cp redis.conf../cluster/8001

localhost:/usr/local/redis # cp redis.conf../cluster/8002

localhost:/usr/local/redis # cp redis.conf../cluster/8003

修改对应目录的配置文件其中port 和cluster-config-file分别对应各自的目录名，可使用sed命令做修改

sed -i "s/7001/7002/g"

启动服务

关于怎样进行redis环境搭建问题的解答就分享到这里了，希望以上内容可以对大家有一定的帮助，如果你还有很多疑惑没有解开，可以关注创新互联行业资讯频道了解更多相关知识。

文章题目：怎样进行redis环境搭建
当前网址：http://myzitong.com/article/ihegoj.html