centos中lvs安装和配置方法
这篇文章主要讲解了“centos中lvs安装和配置方法”,文中的讲解内容简单清晰,易于学习与理解,下面请大家跟着小编的思路慢慢深入,一起来研究和学习“centos中lvs安装和配置方法”吧!
这篇文章主要讲解了“centos中lvs安装和配置方法”,文中的讲解内容简单清晰,易于学习与理解,下面请大家跟着小编的思路慢慢深入,一起来研究和学习“centos中lvs安装和配置方法”吧!
在成都网站制作、网站设计过程中,需要针对客户的行业特点、产品特性、目标受众和市场情况进行定位分析,以确定网站的风格、色彩、版式、交互等方面的设计方向。创新互联建站还需要根据客户的需求进行功能模块的开发和设计,包括内容管理、前台展示、用户权限管理、数据统计和安全保护等功能。
一、lvs-nat模式
网络配置:
代码如下:
lvs-server eth0 :host-only adapter 192.168.56.101
lvs-server eth2 :Internal 192.168.0.1
real-server-1 eth0:Internal 192.168.0.2
real-server-2 eth0:Internal 192.168.0.3
lvs-server:
1、安装ipvsadm软件
代码如下:
yum -y install ipvsadm*
echo 1 > /proc/sys/net/ipv4/ip_forward 路由器功能,ip转发
ipvsadm -C
ipvsadm -At 192.168.56.101:80 -s rr 轮叫模式
ipvsadm -at 192.168.56.101:80 -r 192.168.0.2 -m
ipvsadm -at 192.168.56.101:80 -r 192.168.0.3 -m
ipvsadm -L -n
2、real-server-1:
代码如下:
ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1
3、real-server-2
代码如下:
ifconfig eth0 192.168.0.3 netmask 255.255.255.0
route add default gw 192.168.0.1
route -n 查看路由表
二、lvs-ipturn
网络配置:
代码如下:
lvs-server eth0:host-only adapter 192.168.56.101
real-server-1 eth0:host-only adapter 192.168.56.102
real-server-2 eth0:host-only adapter 192.168.56.103
lvs-server:
配置虚拟ip即vip
代码如下:
ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
ivsadm -C
ipvsadm -At 192.168.56.10:80 -s rr
ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -i
ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -i
ipvsadm -L -n
real-server-1:
代码如下:
ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1 > /proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
real-server-2:
代码如下:
ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1 > /proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
三、lvs-dr
网络配置:
代码如下:
lvs-server eth0:host-only adapter 192.168.56.101
real-server-1 eth0:host-only adapter 192.168.56.102
real-server-2 eth0:host-only adapter 192.168.56.103
lvs-server:
ifconfig eth0:0 192.168.56.10 netmask 255.255.255.255
route add -host 192.168.56.10 dev eth0:0
ipvs:
代码如下:
ipvsadm -C ipvsadm -At 192.168.56.10:80 -s rr ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -g ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -g ipvsadm -L -n
real-server-1: ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
real-server-2: ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
本文名称:centos中lvs安装和配置方法
浏览地址:http://myzitong.com/article/sccdpp.html